How to Fix Slow SSD on Windows 11/10 –  A Simple Guide

Aggravated by sluggish startup times and lagging programs on your once-lightning-fast SSD? You’re not alone. Unlike traditional hard drives, SSDs shouldn’t slow down over time. But fear not! In this guide, we’ll dive into common culprits behind a sluggish SSD and various details to fix Slow SSDs on Windows 11/10.

We’ll then provide clear, step-by-step solutions to get your SSD back in tip-top shape, using real-world examples to make the process a breeze. Get ready to reclaim the speedy performance you crave!

Reasons Behind Slow SSD

Your SSD may be operating too slowly for several reasons. The lack of optimization of driver functions plays a major role. function helps maintain the optimal condition of your SSD by executing the TRIM command on it.

Using the incorrect boot order setting is another documented cause. Finally, an SSD that has integrated VGA enabled may perform slowly.

There are different errors which can be the reason. Such as:

1. SSD write speed is slow.
2. SSD reads slowly, boots slowly, and deletes data slowly.
3. SSD takes a while to launch apps.
4. sluggish SSD in Windows 11
5. SSD not responding quickly in Windows 7

One or more of these might be what you’re dealing with. But do not worry! All these issues can be resolved with the remedies on this list. You can use the given methods to Fix Slow SSD on Windows 11/10.

Method to verify the Speed issue in SSD

If you think that the slow write rates of your SSD are the reason your computer is operating slowly, you may use Command Prompt to confirm your concerns. But, you’ll have to input a few lines of commands, which could be difficult for a novice.

If you are not familiar with the instructions, it is considerably simpler to use a third-party program for speed testing.

How to Fix Slow SSD on Windows 11/10

Now you know the reason behind the lagging system and how will you check it. It’s time to find out some feasible methods that fix the problem easily.

Check the TRIM Command

The first fix for the slow SSD is to use the Command Prompt tool to activate the TRIM command on your PC alone. Follow the instructions below to accomplish this.

1. Click Start and put cmd into the search bar.

2. Select Run as Administrator by right-clicking the Command Prompt.

3. In a common prompt, type the command “fsutil behavior query DisableDeleteNotify” and press enter.

4. If TRIm is enabled, the result will be 0. For 1, write the command given

“fsutil behavior set DisableDeleteNotify 0”

Check And Enable AHCI mode

AHCI is an interface that establishes communication between the software and SATA and enhances its performance. It can be one of the reasons behind SSD slow write speed issues.

To fix it follow the steps given below.

• Open your device manager
• Expand the IDE ATA / ATAPI Controllers.
• You have enabled the AHCI Controller if you see it in the list. If all you see are ATA and IDE words, your machine probably has AHCI disabled.

Your SSD’s outstanding performance and ability to avoid operating slowly are greatly aided by AHCI Mode. The drawback of disabling this feature is the system may crash or your screen turn blue, which is surely you won’t like.

To enable AHCI on Windows 10, follow these steps if it’s disabled:

1. Navigate to these keys and enter 0 for the start value.

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\iaStorV

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\iaStorAVC\StartOverride

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\storahci

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\storahci\StartOverride

2. To activate AHCI mode, restart your computer and navigate to the UEFI/BIOS firmware settings. Restart your computer after you’ve saved and exited.

Turn off the inbuilt VGA.

VGA or Video Graphics Array can affect the speed of your SSD. If you disable it, it will increase the slow SSD performance.

1. Get your computer back up and select BIOS.
2. Go to the section for the Advanced BIOS.
3. Look up onboard VGA.
4. Click the disable button.

Many users confirmed that their problems were resolved after they turned off the onboard VGA function.

Check a Configure Boot Order

Fixing a boot configuration is one of the answers to your question about How to Fix Slow SSD on Windows 11/10. These steps are useful for Boot Order Configuration.

1. When your computer restarts, the BIOS will load.
2. Modify the HDD and SSD boot sequences by assigning the SSD priority.

An improperly configured boot process might be another cause of the SSD drive’s slowness. The operating system will take longer than normal to fetch and load from an external source if the hard disk is selected as the boot priority.

Check The SATA Controller Port

To accurately get an idea about SATA ports, you need to check the handbook given to understand the motherboard. The Intel SATA controller is attached to motherboards, based on Intel chipsets.

Generally, two separate SATA controllers are often included with motherboards; some are SATA 3Gbps, while some are SATA 6Gbps. Make sure your SSD is connected using SATA 6Gbps.

You need to check that your SSD should connect to the Intel controller. SSD slow write speed issues can also be due to the use of non-intel controllers.

Optimize Your SSD to Fix Slow SSD on Windows 11/10

1. Go to the Start Menu, and look for the Disk Cleaner option.
2. Here you will see SSD drive option, click on it. Now click on OK to start the procedure.
3. Remove the junk files that were found in the process.
4. Look up “defrag” in the Start menu, then choose “Defragment and Optimise Drives.”
5. Click the Optimise button after selecting the SSD drive.

In time, SSDs accumulate junk files in storage. To avoid speed issues you need to clean and optimize the SSD from time to time for better performance.

Select a High Power Plan

Transfer, read, and write speeds on your SSD will be sluggish if you select the Balanced Power Plan as it won’t get all the power it needs to function at peak efficiency.

Follow the below steps to check and change the plan to enhance your SSD’d efficiency.

1. Look for “power” in the Start menu and select “Power & Sleep settings.”
2. On the right side, choose Additional power settings.
3. On the left, click Create a Power Plan, then choose High Performance.

Update Your Firmware

Firmware update is important to find new bugs and to resolve them to Fix Slow SSD on Windows 11/10

Check the firmware of your SSD and then from the user’s website update it if a new update is available. It will surely make your SSD’s speed better.

Check if SATA cables are intact

It is always advisable that buying SATA cables from reputable manufacturers is always a good idea.  As its defective or poor-quality cables can reduce SSD’s performance.

Conclusion

By following these steps, you should be able to find out and fix the reasons behind your sluggish SSD. Remember, keeping your SSD optimized and free of unnecessary files will ensure it delivers the fast and furious performance you expect.

If you continue to experience slowdowns after trying these fixes, there may be a hardware issue with your SSD. In that case, consider consulting your system’s documentation or contacting the manufacturer for further assistance.